C&E Universal thermostat Adapter -40 up to 99 °C UT-200 UT200 Fiche De Données
Codes de produits
UT200
20
5. Functional description
The „UT 100“ can switch a connected load (230V~/50Hz, max.
16A, 3680VA) on or off based on the tempeperature.
16A, 3680VA) on or off based on the tempeperature.
„UT 100“ is to be connected to a mains wall socket. The
temperature sensor can be placed very universally thanks to
its 2 m long connection cable, which creates new application
areas.
temperature sensor can be placed very universally thanks to
its 2 m long connection cable, which creates new application
areas.
For example, „UT 100“ can be used as a replacement for
defective mechanical thermostat. A refrigerator with defective
thermostat can be switched on and off using „UT 100“. The
temperature sensor, in such a case, is placed at a suitable
location inside the refrigerator and measures the internal
temperature.
defective mechanical thermostat. A refrigerator with defective
thermostat can be switched on and off using „UT 100“. The
temperature sensor, in such a case, is placed at a suitable
location inside the refrigerator and measures the internal
temperature.
„UT 100“ switches the refrigerator on when a particular
temperature (e.g. 9.3°C) is reached; this tempearture can be
set. It can then be switched off, e.g., at 8.1°C.
temperature (e.g. 9.3°C) is reached; this tempearture can be
set. It can then be switched off, e.g., at 8.1°C.
The switch on and switch off temperatures can be set
independently of each other.
independently of each other.
The switch on and switch off temperatures are
saved in an EEPROM in „UT 100“.
saved in an EEPROM in „UT 100“.
This means that the data is retained even in case
of a power failure or when the device is plugged
into a different socket. There are no batteries
required.
of a power failure or when the device is plugged
into a different socket. There are no batteries
required.
„UT 100“ can be operated automatically or manually.