C&E Universal thermostat Adapter -40 up to 99 °C UT-200 UT200 Fiche De Données
Codes de produits
UT200
24
7. Handling
The operation of the product is permitted only in dry
rooms.
rooms.
Avoid the following unfavourable ambient conditions
during the operation or transportation:
during the operation or transportation:
• Excessive dampness or humidity
• Extreme cold (< 0°C) or heat (> 50°C)
• Direct sunlight
• Dust or combustible gases, vapours or solvents
• Strong vibrations
• Strong magnetic fields such as those found in
• Extreme cold (< 0°C) or heat (> 50°C)
• Direct sunlight
• Dust or combustible gases, vapours or solvents
• Strong vibrations
• Strong magnetic fields such as those found in
the vicinity of machinery or loudspeakers.
Never use the product immediately after it has
been taken from a cold room to a warm one. The
condensate generated could destroy the product.
Besides, there is a danger to the life through an
electric shock!
been taken from a cold room to a warm one. The
condensate generated could destroy the product.
Besides, there is a danger to the life through an
electric shock!
Wait until the product is at room temperature and
the condensate has evaporated. This may take
several hours. Only then the product can be used.
the condensate has evaporated. This may take
several hours. Only then the product can be used.
The housing must not be opened.
None of the components inside the product is to be
maintained by the user. Moreover, the licence (CE)
and warranty will lapse in such cases.
maintained by the user. Moreover, the licence (CE)
and warranty will lapse in such cases.
Do not hold the „UT 100“ universal thermostat and
the plug of the device you want to connect to „UT
100“ with wet hands. There is a danger of
electrocution.
the plug of the device you want to connect to „UT
100“ with wet hands. There is a danger of
electrocution.