C&E TE857 Wireless Weather Station 646510 Fiche De Données
Codes de produits
646510
91
e) "Time/Date" Function (Icon "
")
Select the "time/date" function with the "–" (6) and "+" (7) buttons in the weather station basic display.
The respective icon (see above) flashes.
The respective icon (see above) flashes.
The following settings and displays are available:
Switch Display Data
Repeatedly press the "SET" button (2) briefly to switch between the following displays:
• Time (hour : minute : second)
• Date (day : Month: year or month: day: year, depending on setting
• Time UTC (hour : minute)
• Time and weekday (hour : minute : day of the week)
• Time and city (hour : minute : city)
• Time (hour : minute : second)
• Date (day : Month: year or month: day: year, depending on setting
• Time UTC (hour : minute)
• Time and weekday (hour : minute : day of the week)
• Time and city (hour : minute : city)
Setting the Language for the Day of the Week, Geographical Position, Date, Time
The following settings require some time. It is important that you start by selecting a city from the appendix that is
near your location. Its geographic data is later used for calculating the sunrise and sunset times.
near your location. Its geographic data is later used for calculating the sunrise and sunset times.
A special feature if the weather station is the possibility for "pros" to enter geographic latitudes and
longitudes (degrees and minutes); the data fort his is available e.g. in the internet and on some maps.
longitudes (degrees and minutes); the data fort his is available e.g. in the internet and on some maps.
Settings are made in a certain order that must be gone through completely (steps 1 to 13).
When the "SET" (2) button is kept down for a longer period of time, the setting mode is left, but all changes/settings
already made are lost! The same is true if nothing is entered for some time.
Step 1:
When the "SET" (2) button is kept down for a longer period of time, the setting mode is left, but all changes/settings
already made are lost! The same is true if nothing is entered for some time.
Step 1:
Keep the "SET" button (2) pressed until the weekday value display language next to the time starts flashing. Adjust
the language with the button "–" (6) or "+" (7) buttons:
GER = German
ENG = English
DUT = Dutch
SPA = Spanish
ITA
the language with the button "–" (6) or "+" (7) buttons:
GER = German
ENG = English
DUT = Dutch
SPA = Spanish
ITA
= Italian
FRE = French
Step 2:
Briefly press the "SET" button (2) to go to the next setting.
Step 3:
The display shows "CITY" and the tree-digit city code (or abbreviation for a city) flashes. The city codes can be found
in the appendix to these operating instructions. Adjust the city code with the "–" (6) or "+" (7) buttons:
in the appendix to these operating instructions. Adjust the city code with the "–" (6) or "+" (7) buttons:
Select a city near your location so that the internal calculation for sunrise and sunset times is as accurate
as possible.
When choosing "USR" as a city code, the geographic position of your location can be entered by
latitudes and longitudes if you have this data available (e.g. from the internet, etc.), see section 4.
as possible.
When choosing "USR" as a city code, the geographic position of your location can be entered by
latitudes and longitudes if you have this data available (e.g. from the internet, etc.), see section 4.