C&E TE857 Wireless Weather Station 646510 Fiche De Données



 Switching Pre-Alarm On/Off and Setting it

• First switch on the alarm clock function as described above, using " W" or " S".
• Then select the pre-alarm and press the "ALARM/CHART" button briefly until "PRE-AL" is displayed.
• Switch the pre-alarm on or off with the "–" (6) or "+" (7) buttons. When the pre-alarm is switched off, the display

shows "OFF", when the pre-alarm is switched on, it shows a time of 15, 30, 45, 60 or 90 minutes).

• Press the "ALARM/CHART" (1) button until the number displayed (15, 30, 45, 60, 90) starts to flash. Set the minutes

for the pre-alarm with the "–" (6) or "+" (7) buttons and confirm the settings by briefly pressing "SET" (2).



Only a time of 15, 30, 45, 60 or 90 minutes can be set.



 Stopping the Alarm Signal

• When the alarm signal sounds at the time set, it may be stopped with the "ALARM/CHART" (1) button.
• You may also activate a snooze function; see next section.



 Snooze Function ("SNOOZE")

When the alarm sounds at the set time, you can activate the snooze function by briefly pressing the "SNOOZE/
LIGHT" (6) button on the top of the weather station.
This interrupts the alarm signal for a set time before it starts again.
You can reactivate the snooze function again if you still don’t want to get up.



If the alarm signal is not stopped within 2 minutes by briefly pressing the "ALARM/CHART" (1) button,
the snooze function is automatically activated. This happens three times in succession, then the alarm
function stops.
The duration for which the alarm signal is interrupted can be set when the alarm time is programmed
(1 to 15 minutes), see section "set alarm time".