ECS K8M800-M2 K8M800-M2 (V2.0) Manuel D’Utilisation
Codes de produits
K8M800-M2 (V2.0)
37
Using BIOS
VIA OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
OnChip VIA SATA
[Enabled]
SATA Mode
[IDE]
IDE DMA transfer access
[Enabled]
OnChip IDE Channel0
[Enabled]
OnChip IDE Channel1
[Enabled]
IDE Prefetch Mode
[Enabled]
Primary Master PIO
[Auto]
Primary Slave PIO
[Auto]
Secondary Master PIO
[Auto]
Secondary Slave PIO
[Auto]
Primary Master UDMA
[Auto]
Primary Slave UDMA
[Auto]
Secondary Master UDMA
[Auto]
Secondary Slave UDMA
[Auto]
IDE HDD Block Mode
[Enabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
OnChip VIA SATA (Enabled)
This option allows you to enable or disable the onboard Serial ATA device.
SATA Mode (IDE)
Use this item to select the mode of Serial ATA
IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto the PCI bus and
nonburstable transactions do not.
nonburstable transactions do not.
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the motherboard.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interface supports IDE prefetching, for faster drive access. If you install
a primary and secondary add-in IDE interface, set this field to Disabled if the interface does not
support prefetching.
a primary and secondary add-in IDE interface, set this field to Disabled if the interface does not
support prefetching.
Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you assign
the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose Auto to let the
system auto detect which PIO mode is best, or select a PIO mode from 0-4.
the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose Auto to let the
system auto detect which PIO mode is best, or select a PIO mode from 0-4.
Primary/Secondary Master/Slave UltraDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA technology, which provides faster access to IDE devices.
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to Auto. You
may have to install the UltraDMA driver supplied with this motherboard in order to use an UltraDMA
device.
may have to install the UltraDMA driver supplied with this motherboard in order to use an UltraDMA
device.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the drive can
support and improves the speed of access to IDE devices.
automatically detect the optimal number of block read and writes per sector that the drive can
support and improves the speed of access to IDE devices.
Press <Esc> to return to the Integrated Peripherals page.