Texas Instruments AFE5809 Evaluation Module AFE5809EVM AFE5809EVM Fiche De Données
Codes de produits
AFE5809EVM
Overview
1
Overview
This document is intended as a step-by-step guide through the AFE5809EVM Evaluation Module (EVM)
setup and test. The EVM is shipped with a default configuration from the manufacturer. With this
configuration, the onboard CMOS clock is used for a analog-to-digital converter sampling clock; the
onboard oscillator is used for CW mode operation. No external clock generator is required. Users need to
provide the input signal for measurement from a signal generator.
setup and test. The EVM is shipped with a default configuration from the manufacturer. With this
configuration, the onboard CMOS clock is used for a analog-to-digital converter sampling clock; the
onboard oscillator is used for CW mode operation. No external clock generator is required. Users need to
provide the input signal for measurement from a signal generator.
Detail explanation regarding the jumpers, connectors, and test points appear in
. The graphical
user interface (GUI) can be downloaded from the TI Web site.
2
Default Configuration
shows the default configuration of the EVM from the factory. The accompanying list identifies the
basic components on the EVM board.
Figure 1. AFE5809EVM Basic Configuration
3
SLOU338A – October 2012 – Revised November 2012
AFE5809EVM Evaluation Module
Copyright © 2012, Texas Instruments Incorporated