Keysight Technologies USB data capturing module U2331A Input: 3 MS/s, output: 1 MS/s U2331A OPT 902 + ABD Manuel D’Utilisation
Codes de produits
U2331A OPT 902 + ABD
42
U2300A Series DAQ Service Guide
3
Dismantle Procedures
General Disassemble
This chapter provides the step- by- step guides on how to
dismantle the module and install the replacement assembly. To
assemble back the module, follow the instructions in reverse
order.
dismantle the module and install the replacement assembly. To
assemble back the module, follow the instructions in reverse
order.
The removable assemblies include:
• Plastic casing
• Metal casing
• Rear metal casing
• Front metal casing, which is attached to the carrier board
and measurement board
Mechanical Disassemble
Follow the instructions in this section for the instrument
disassemble process.
disassemble process.
Step 1: Pull the bumper out to remove the plastic casing.
N O T E
The parts shown in the following figures are representative and
may look different than what you have in your module.
may look different than what you have in your module.
Plastic casing