Emerson GXT2 4500VA/6000VA Extended Battery Cabinets + Ocwebcard GXT2-240VBATTK Manuel D’Utilisation

For enhanced UPS communications and control, the
Intellislot SNMP/Web Card will deliver SNMP and web-
management communications capability to your GXT2
unit. This feature will provide flexibility in how you monitor
and control your UPS over the network. 
The card is also easily configurable to work in a standard SNMP
implementation and with Liebert’s MultiLink unattended
shutdown software.

This hot-installable card provides a USB interface port for use
with Microsoft Windows 2000 and XP Power Management,
providing graceful unattended shutdown of your connected
equipment without the need to install any additional software.
The USB card kit includes a 6-foot USB cable.

The Multiport4 Card is a hot-installable card that splits the
UPS contact signals into four isolated sets of contact closure
signals, enabling the user to interface with MultiLink
Shutdown software on four servers simultaneously.

Provides 4 volt-free, relay contact signals for "On Battery",
"Low Battery", "On Bypass", "UPS Fault", and "Summary Alarm"
status. The card can be hot-installed, and connections are
through a DB25F connector.

Automatic Responses 
for every UPS event 
may be customized

Configuration details
appear in the bottom
window pane when the
event and response type
are selected

SNMP/Web Card monitors a wide
range of UPS information, allowing
users to monitor, control, and manage
their GXT2 UPS over the network via
the Web and SNMP.

Your GXT2 UPS system can be used with Liebert MultiLink
shutdown software. This package automatically shuts
down computer operating systems in a smooth and orderly
manner if UPS battery capacity runs low.

Multilink automated shutdown software performs the critical
task of protecting information for one computer or a network.
It is available in both single and multi-user versions and is
designed to run on a wide variety of operating platforms.
During an extended utility failure, MultiLink automatically
shuts down computer operating systems in a smooth and
orderly manner if UPS battery capacity runs low. MultiLink is
designed to keep users informed. Notification about critical
alarms can be sent to alphanumeric pagers or directly to the
computer screen via pop-up messages. 
MultiLink may be configured for either in-band or out-of-
band operation. Using the network to send alarm messages
and data can dramatically reduce cable and installation
costs. Alternatively, separate communications cables can
be run to each computer when network wiring is a concern.

Communications for Power Monitoring and Control