Gigaset E36 HANDGIGAE36 Manuel D’Utilisation

Codes de produits
HANDGIGAE36
Page de 22
5
First steps
Gigaset E36 / IM1_en / A31008-M1853-R101-2-6Z19 / starting.fm / 21.05.2007
Ver
si
on 4, 16.
09.20
05
You can also attach a cord for carrying the 
handset in your hand or wearing it around 
your neck.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Reach into the housing cavity and pull 
the battery cover upwards.
Connection socket for headset
You will find suitable headsets on the 
Internet at www.plantronics.com.
Registering 
You have to register your Gigaset E36 on a 
base station before you can use it. It can 
be registered on up to four base stations. 
The registration process depends on the 
particular base station. 
Automatically registering the Gigaset E36 
on the Gigaset E360/365
Requirement: the handset must not 
already be registered on any base station. 
Registering the handset on the Gigaset 
E360/365 base station occurs automati-
cally. 
¤
Place the handset in the charging cra-
dle of the base station with its display 
facing forward
You will hear a confirmation tone.
Automatic registration can take up to 
5 minutes. While registration is in 
progress the screen displays 
Registering 
The handset is assigned the lowest unas-
signed internal number (1–4). If several 
handsets are registered on the base, the 
internal number is shown in the display 
after registration, for example 
2
. This 
means that the handset has been assigned 
the internal number 2.
Manually registering the Gigaset E36 
on the Gigaset E360/365
You must activate manual registration of 
the handset on both the handset and the 
base station. 
After it has registered, the handset returns 
to idle status. If several handsets are regis-
tered on the base, the internal number is 
shown in the display after registration, for 
example 
2
The registration process is cancelled after 
60 seconds. If the handset has not regis-
tered within this time, repeat the process.
Notes:
– Automatic registration is only possible if 
the base station on which you wish to reg-
ister the handset is not being used to make 
a call. 
– A key press cancels automatic registration.
– If four handsets are already registered on a 
Gigaset E360/365 base station there are 
two options:
– The handset with the internal number 4 
is in idle status: the handset you wish to 
register is assigned the number 4. The 
handset that was previously number 4 is 
de-registered.
– The handset with the internal number 4 
is being used: the handset you wish to 
register cannot be registered.
– If automatic registration does not work, the 
handset will have to be registered manu-
ally.