Atmel Xplained Pro Evaluation Kit ATSAM4E-XPRO ATSAM4E-XPRO Fiche De Données
Codes de produits
ATSAM4E-XPRO
Atmel SAM4E Xplained Pro [USER GUIDE]
42216A-MCU-01/2014
19
Table 4-17. Virtual COM Port Connections
Pin on SAM4E
Function
PA9
URXD0 (SAM4E RX line)
PA10
UTXD0 (SAM4E TX line)
4.3.3
Atmel Data Gateway Interface
The Embedded Debugger features an Atmel Data Gateway Interface (DGI) by using either a USART or TWI
port. The DGI can be used to send a variety of data from the SAM4E to the host PC. For further information on
how to use the DGI interface see
Table 4-18. DGI Interface Connections When Using USART
Pin on SAM4E
Function
PB0
RXD0
PB1
TXD0
PB13
SCK0
Table 4-19. DGI Interface Connections When Using TWI
Pin on SAM4E
Function
PA3
SDA (Data line)
PA4
SCL (Clock line)
Four GPIO lines are connected to the Embedded Debugger. The EDBG can monitor these lines and time
stamp pin value changes. This makes it possible to accurately time stamp events in the SAM4E application
.
Table 4-20. GPIO Lines Connected To the EDBG
Pin on SAM4E
Function
PD27
GPIO0
PE3
GPIO1
PE4
GPIO2
PE2
GPIO3