Atmel Xplained Pro Evaluation Kit ATSAM4E-XPRO ATSAM4E-XPRO Fiche De Données
Codes de produits
ATSAM4E-XPRO
117
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
Condition Flags
If S is specified, these instructions:
Update the N and Z flags according to the result
Can update the C flag during the calculation of Operand2, see
Do not affect the V flag.
Examples
MOVS
R11, #0x000B
; Write value of 0x000B to
R11, flags get updated
MOV
R1, #0xFA05
; Write value of 0xFA05 to
R1, flags are not updated
MOVS
R10, R12
; Write value in R12 to R10,
flags get updated
MOV
R3, #23
; Write value of 23 to R3
MOV
R8, SP
; Write value of stack pointer to R8
MVNS
R2, #0xF
; Write value of 0xFFFFFFF0 (bitwise inverse of 0xF)
; to the R2 and update flags.
12.6.5.7 MOVT
Move Top.
Syntax
MOVT{cond} Rd, #imm16
where:
cond
is an optional condition code, see
.
Rd
is the destination register.
imm16
is a 16-bit immediate constant.
Operation
MOVT writes a 16-bit immediate value, imm16, to the top halfword, Rd[31:16], of its destination register. The write
does not affect Rd[15:0].
does not affect Rd[15:0].
The MOV, MOVT instruction pair enables to generate any 32-bit constant.
Restrictions
Rd must not be SP and must not be PC.
Condition Flags
This instruction does not change the flags.
Examples
MOVT
R3, #0xF123 ; Write 0xF123 to upper halfword of R3, lower halfword
; and APSR are unchanged.