Atmel Xplained Pro Evaluation Kit ATSAM4E-XPRO ATSAM4E-XPRO Fiche De Données

SAM4E [DATASHEET]

Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14

526

The pins used for interfacing the Static Memory Controller are multiplexed with the PIO lines. The programmer
must first program the PIO controller to assign the Static Memory Controller pins to their peripheral function. If I/O
Lines of the SMC are not used by the application, they can be used for other purposes by the PIO Controller.

The SMC is clocked through the Power Management Controller (PMC), thus the programmer must first configure
the PMC to enable the SMC clock.

The SMC provides up to 24 address lines, A[23:0]. This allows each chip select line to address up to 16 Mbytes of
memory. 

If the physical memory device connected on one chip select is smaller than 16 Mbytes, it wraps around and
appears to be repeated within this space. The SMC correctly handles any valid access to the memory device
within the page (see 

). 

NCS[3:0]

Static Memory Controller Chip Select Lines

Output

Low

NRD

Read Signal

Output

Low

NWE

Write Enable Signal

Output

Low

A[23:0]

Address Bus

Output

D[7:0] Data 

Bus

I/O

NWAIT

External Wait Signal

Input

Low

NANDCS

NAND Flash Chip Select Line

Output

Low

NANDOE

NAND Flash Output Enable

Output

Low

NANDWE

NAND Flash Write Enable

Output

Low