Linear Technology DC1010A-A - LTC2493 24-Bit 4/2-ch I²C Delta Sigma ADC (Req. DC590) DC1010A-A DC1010A-A Fiche De Données
Codes de produits
DC1010A-A
QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1010
2/4 CHANNEL 24,16,16/PGA-BIT ADC WITH I2C
2
QUICK START PROCEDURE
Connect the DC1010 to a DC590 USB Serial Con-
troller using the supplied 14 conductor ribbon ca-
ble. Connect DC590 to the host PC with a standard
USB A/B cable. Run the evaluation software sup-
plied
troller using the supplied 14 conductor ribbon ca-
ble. Connect DC590 to the host PC with a standard
USB A/B cable. Run the evaluation software sup-
plied
with
DC590
or
downloaded
from
www.linear.com
. The correct program will be
loaded automatically. Click the COLLECT button to
start reading the input voltage. The software allows
for selecting the input channel, single ended or dif-
start reading the input voltage. The software allows
for selecting the input channel, single ended or dif-
ferential mode and 50/60 Hz rejection settings. Se-
lecting 2x Speed located at the bottom of the strip-
chart display will double the data output rate at the
expense of offset accuracy (LTC2493 and LTC2487
only).
lecting 2x Speed located at the bottom of the strip-
chart display will double the data output rate at the
expense of offset accuracy (LTC2493 and LTC2487
only).
Tools are available for logging data, changing refer-
ence voltage, changing the number of points in the
strip chart and histogram, and changing the num-
ber of points averaged for the DVM display.
ence voltage, changing the number of points in the
strip chart and histogram, and changing the num-
ber of points averaged for the DVM display.