Sygonix Surveillance Camera 24457D 24457D Manuel D’Utilisation
Codes de produits
24457D
34
The home technology brand for the entire house. More information at www.sygonix.com
10. Maintenance and Cleaning
Servicing or repair must only be carried out by a specialist or specialist workshop. There are no
components on the inside of the product that need maintenance by you, this is why you should
never open/disassemble it (apart from the assembly and commissioning work described in these
instructions).
A dry, soft and clean cloth is suffi cient for cleaning the outside. For stronger contamination of the
casing, the cloth can be moistened slightly with clean water. Do not push the front pane or hous-
ing too strongly. This will lead to scratches.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing or even impair function.
components on the inside of the product that need maintenance by you, this is why you should
never open/disassemble it (apart from the assembly and commissioning work described in these
instructions).
A dry, soft and clean cloth is suffi cient for cleaning the outside. For stronger contamination of the
casing, the cloth can be moistened slightly with clean water. Do not push the front pane or hous-
ing too strongly. This will lead to scratches.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing or even impair function.
11. Removal of Interferences
No camera image
• Set the screen to the correct input channel.
• Check the voltage/current supply of the camera.
If the cable is too long, the voltage in the cable will drop. Use a cable with a larger cross-section
• Set the screen to the correct input channel.
• Check the voltage/current supply of the camera.
If the cable is too long, the voltage in the cable will drop. Use a cable with a larger cross-section
if required.
• Check the camera’s cable connections.
• For long video cables, try connecting a test screen or something similar to the camera with a
• For long video cables, try connecting a test screen or something similar to the camera with a
shorter cable.
Use a higher-quality video cable or video pre-amplifi er if required.
Only use black/white camera image
• Check the setting in the setup menu.
• At night, the camera will automatically switch to black/white display (at the same time, all IR
• Check the setting in the setup menu.
• At night, the camera will automatically switch to black/white display (at the same time, all IR
LEDs are activated). Colour display is not possible here.
Screen too bright
• Check the settings in the setup menu; reset the camera to factory settings if required.
• Never point the camera at the sun or a lamp.
• Select the corresponding settings in the setup menu, e.g. for white balance, etc.
• Check the settings in the setup menu; reset the camera to factory settings if required.
• Never point the camera at the sun or a lamp.
• Select the corresponding settings in the setup menu, e.g. for white balance, etc.