Renkforce CD-1000 CD-PLAYER 29265c6 Fiche De Données

•  Push the button MEMORY > in the display (4); MEMO 1 appears.
•  Search  for  the  first  desired  track  with  the  forward  button  66/66c  (7)  or  the  return  button

c44/44 (8).

•  Push the button MEMORY (9) again > The track is stored > The display shows MEMO 2.
•  Select the next track with the forward 66/66c (7) or return button c44/44 (8) and save it with the

button MEMORY (9) > The display shows MEMO 3.

•  Continue until all desired tracks have been saved.
•  Push the STOP 5 (6) button to complete programming.
•  Press the PLAY/PAUSE 6/3 (5) button to play back the track sequence.
•  Push the button MEM CLEAR (11), to delete the stored track sequence again.

•  Push the button INTRO (12) until the display (4) shows INTR ON.
•  Push the PLAY/PAUSE button 6/3 (5) to start the playback.
•  Each track is sampled for 10 seconds. Then the pick-up will jump to the next track.
•  Push the button INTRO (12) until the display (4) INTROFF appears to switch off this function again.

Use the system remote control enclosed with the Renkforce amplifier A-1000 to comfortably control the

main  function  of  the  CD  player  and  other  devices  of  the  Renkforce  HiFi-series  comfortably  from  your

chair.
The remote control has the following buttons:
•  Rewind button c44/44
•  Button fast forward 66/66c
•  Button STOP 5
•  Button OPEN/CLOSE
•  Button PLAY/PAUSE 6/3

The function of these buttons is the same as that of the buttons right at the CD player.