Unold 48946 Fiche De Données

19

13.  Maintain a distance of at least 

15 

cm from other objects to 

ensure sufficient ventilation of 

the appliance.

14.  Make sure that the power cord 

does not hang over the edge of 

the countertop or table, since this 

can cause accidents, for example 

if small children pull on the cord.

15.  Do not operate or store the ice 

cube maker outdoors.

16.  Use the appliance only after it has 

been properly assembled. 

17.  Fill the water tank only with clear, 

cold water.

18.  Do not insert any objects in the 

interior of the appliance, to avoid 

injuries.

19.  After unpacking, do not operate 

the appliance for at least two 

hours, to prevent damage to the 

compressor.

20.  Do not switch the appliance on 

and off repeatedly, since this can 

damage the compressor. There-

fore, the appliance should be ope-

rated for at least three minutes.

21.  Switch off the appliance and 

unplug it from the power sup-

ply before moving it, to prevent 

damage to the appliance.

22.  Do not use the appliance with 

accessories of other manufactur-

ers or brands, to prevent damage.

23.  Unplug the appliance from the 

power supply after use and prior 

to cleaning. Never leave the 

appliance unattended when it is 

plugged in to the power supply.

24.  Clean the appliance after every 

use (see chapter on Cleaning and 

Care).

25.  Never attempt to repair the appli-

ance yourself, since this can 

result in electric shock.

26.  Check the appliance, the plug and 

the power cord regularly for wear 

or damage. In case of damage to 

the power cord or other parts, ple-

ase send the appliance for inspec-

tion and repair to our after sales 

service. Unauthorized repairs can 

result in serious risks to the user 

and void the warranty. 

27.  If the supply cord is damaged, it 

must be replaced by the manu-

facturer or its service agent or a 

similarly qualified person in order 

to avoid a hazard.

 

ƒ

When unpacking the appliance and removing the packaging material, make 

sure not to tilt the appliance more than 45 °, to prevent damage to the 

compressor inside the appliance. 

 

ƒ

If you wish to move the appliance, please use the handles on the bottom 

of the appliance. 

1.  Remove all packaging materials 

and any transport safety devices.

2.  Check to make sure that all acces-

sories are present.

3.  Clean all parts with a damp 

cloth, as described in the chapter 

“Cleaning and care”.

4.  Check to make sure that all parts 

are assembled correctly and the 

appliance is stable and level.

5.  Now connect the power cord to 

the back of the appliance.

6.  Connect the appliance via the 

power cord to the power supply 

(220–240 V~, 50 Hz). 

7.  The indicator lamp for medium 

ice cubes (12) blinks green.