Unold 48946 Fiche De Données

21

To drain the water from the appliance, please proceed as follows:

1. 

2.  Hold the appliance over a suffici-

ently large bowl or the kitchen 

sink. 

3.  Remove the cap on the residual 

water drain (5) on the 

bottom of 

the appliance. 

4.  Pull out the drain plug. Please 

make sure that the plug does 

not fall into the sink drain. Our 

recommendation: place a large 

sieve over the sink drain or close 

it with a stopper.

5.  Wait until the water has drained 

completely from the appliance 

and then plug the drain again. 

6.  Make sure not to tilt the appli-

ance too far, to prevent damage to 

the compressor.

1. 

2.  Do not immerse the appliance 

and power cord in water or other 

liquids or wash them in the dish-

washer.

3.  Wipe off the ice cube maker with 

a damp cloth. You can clean the 

ice container with a little warm 

dishwashing water.

4.  The water tank can also be clea-

ned with a damp cloth, if neces-

sary. 

5.  The ice container is not dish-

washer-safe. 

6.  Do not use any abrasive scouring 

agents, steel wool, metal objects, 

hot cleaning agents or disinfec-

tants.

7.  After use, please leave the ice 

cube maker open to prevent the 

formation of mold or bacteria.

8.  The appliance and power plug 

must be completely dry before the 

appliance can be operated again.

9.  When completely dry, store the 

ice cube maker in a dry, safe 

place so that it is protected from 

dust, shocks, heat and mois-ture.