Unold 48946 Fiche De Données

22

The compressor hums 

very loudly.

The voltage is too low.

Switch off the appliance 

and check whether it is 

connected to a 220–

240 V~ wall socket.

Indicator lamp shows 

that the ice container 

is full, even though it 

is not full.

The room temperature 

is too cool.

Remove the ice 

container and push it 

back into the appliance.

Pieces of ice are 

jammed.

Switch the appliance 

off. Empty the ice 

container and restart 

the appliance. If the 

problem persists, 

contact our customer 

service department.

The sensor is defective. Contact our customer 

service department.

Indicator lamp shows 

that the water level is 

too low, even though 

there is enough water.

The water is not 

conductive enough.

Add a pinch of salt to 

the water in the water 

tank.

Indicator lamp for low 

water level is out, even 

though there is no 

water in the tank.

The water is not 

conductive enough.

Switch the appliance 

off. Clean the water tank 

thoroughly and restart 

the appliance.

The sensor is defective. Contact our customer 

service department.

No indicator lamp 

lights up when you 

plug the appliance into 

the wall socket.

The appliance is not 

connected correctly.

Check to make sure that 

the plug was inserted 

correctly into the wall 

socket.

A component is 

defective.

Contact our customer 

service department.

The indicator lamps for 

insufficient water and 

full ice container blink 

red at the same time.

An oversized ice 

cube is blocking the 

evaporator.

Switch the appliance 

off. Wait until the ice 

has melted. Start the 

appliance again and 

select a smaller ice cube 

size.

The motor in the 

appliance is defective.

Contact our customer 

service department.

The appliance is 

working, but does not 

make ice.

Coolant is leaking.

Contact our customer 

service department.