Philips Table grill HD4419/20 HD4419/20 Fiche De Données

 1 

 Set the temperature control to the ‘OFF’ position.

  

 Unplug the appliance and let it cool down.

  

 Pull the thermostat unit out of the appliance (Fig. 8).

  

 Wipe the thermostat unit with a damp cloth.

Do not immerse the thermostat unit with mains cord in water or any other liquid.

 5 

 Remove excess oil from the grilling plate with a piece of kitchen paper before you remove 

the grilling plate for cleaning.

 6 

 Lift the grilling plate from the base by its handgrips (Fig. 9).

 7 

Soak the grilling plate in hot water with some washing-up liquid for five minutes or drizzle

some lemon juice onto the grilling plate. This loosens any caked food or grease.

 8 

 Slide the drip tray out of the base (Fig. 10).

 9 

 Clean the base and the drip tray with a damp cloth.

 10 

 Clean the grilling plate and spatula/tongs with a soft cloth or sponge in hot water with some 

washing-up liquid or in the dishwasher.

 11 

 Dry the grilling plate, drip tray and spatula/tongs.

The inside of the thermostat unit socket must be completely dry before you reinsert the 

thermostat unit into it. To dry the socket, wipe the inside with a dry cloth. If necessary, shake out 

excess water first.

 1 

 Reassemble the appliance.

 1 

Leave the thermostat unit in the grill. Wind the cord and fix it with the cord strap (Fig. 11).

  

 Store the grill in upright position on a dry and level surface (Fig. 1).

Do not throw away the appliance with the normal household waste at the end of its life, but 

hand it in at an official collection point for recycling. By doing this, you help to preserve the 

environment (Fig. 13).

If you need service or information or if you have a problem, please visit the Philips website at 

www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone 

number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, 

go to your local Philips dealer.

-

9