Hawker Energy , 6V Ah lead acid battery 4533 4533 Fiche De Données
Codes de produits
4533
CYCLON
®
battery standard descriptions
CYCLON battery cells are ideal for small ampere-hour
applications up to 25Ah. The sealed-lead construction
uses a starved-electrolyte system and a patented
grid-alloy providing numerous advantages.
applications up to 25Ah. The sealed-lead construction
uses a starved-electrolyte system and a patented
grid-alloy providing numerous advantages.
Standard batteries are offered based on combinations of
the previously described CYCLON battery cells and are
available in 6 and 12 volt configurations with capacities
ranging from 2.5Ah to 25Ah.
the previously described CYCLON battery cells and are
available in 6 and 12 volt configurations with capacities
ranging from 2.5Ah to 25Ah.
Battery Packages
Rigid plastic cases or shrink wrap packaging are available.
Rigid plastic cases or shrink wrap packaging are available.
Rigid Plastic
Cases are available for most designs in either flame-
retardant ABS material, meeting UL 94V-0 flammability
rating, or Styrene (available only in 2X3 D and X battery
configurations). Some cases have mounting holes. Rigid
plastic cases are recommended for applications in which
the battery must withstand vibration, movement or extreme
weather conditions.
Cases are available for most designs in either flame-
retardant ABS material, meeting UL 94V-0 flammability
rating, or Styrene (available only in 2X3 D and X battery
configurations). Some cases have mounting holes. Rigid
plastic cases are recommended for applications in which
the battery must withstand vibration, movement or extreme
weather conditions.
Shrink Wrap
Shrink wrap packaging is less expensive and smaller in
size and weight. A plastic extrusion insulates the battery
top and keeps the cells in line. A heavy duty shrink sleeve
holds the cells firmly in place. Shrink wrap packaging
is recommended for applications in which the battery
remains stationary.
Shrink wrap packaging is less expensive and smaller in
size and weight. A plastic extrusion insulates the battery
top and keeps the cells in line. A heavy duty shrink sleeve
holds the cells firmly in place. Shrink wrap packaging
is recommended for applications in which the battery
remains stationary.
Battery Terminations for Single Cell and Monoblocs
Tab/Stud
Tab Adapters (D, DT, X, and E)
Available to convert .187" tabs to .250" tabs, 0.032" thick,
and vice versa.
Available to convert .187" tabs to .250" tabs, 0.032" thick,
and vice versa.
BC Quick Disconnect Terminals
AMP series 250 Faston terminals are available for BC
batteries.
AMP series 250 Faston terminals are available for BC
batteries.
Connection Terminations
A wide variety of terminations are offered. For
recommendations or to specify; contact your EnerSys
A wide variety of terminations are offered. For
recommendations or to specify; contact your EnerSys
®
Territory Manager or battery assembler.
Fusible Links
Specify your requirement.
Specify your requirement.
CYCLON
®
Battery Single Cell
Alternative battery configurations
Standard battery configurations are rectangular in
overall shape. A sample of other possible configurations
are illustrated below. These can be held together with
tape (offering the lowest cost and minimum electrical
and mechanical protection) or by shrink wrapping. The
CYCLON
overall shape. A sample of other possible configurations
are illustrated below. These can be held together with
tape (offering the lowest cost and minimum electrical
and mechanical protection) or by shrink wrapping. The
CYCLON
®
battery Single Cell can be custom configured
in virtually an infinite number of designs.
Rectangular
Rhomboid
Nested
Trapezoid
Tubular
Flat Pack
D
.187” x .025”
DT
.187” x .025”
X
.250” x .025”
E
.250” x .025
J
.312” x .032”
BC
6mm post (negative)
8mm post (positive)
Cell
size
Dimensions
9
Publication No: EN-CYC-SG-003 - December 2008
www.enersys-emea.com