Bosch Appliances Home Security System D1260B Manuel D’Utilisation

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter) 

 

 

Bosch Security Systems | 9/04 | 50410D 

65 

 

Using Print Log 

1.

 

Press the 

Print Log ?>

 soft key. 

 

2.

 

The display changes to 

Enter start date:

 

 

Press the 

Print all events>

 soft key to print all 

events in the log. 
Press the 

<Exit

 soft key to exit this function and 

return to idle text. 
The events are sent to a connected printer and 
display changes to 

Printing all events in history

 

for three seconds before returning to idle text. 

 

 

3.

 

Enter the start date in the form of mm/dd.  

For example, to enter 12/21 as the start date, press 

1 + 2 + 2 + 1

. 

 

 

Once you start entering digits, the 

Print all 

events>

 soft key is replaced with the 

Enter>

 soft 

key. 
Press either the 

Enter>

 soft key or the 

ENTER 

button. 

4.

 

If the date entered is valid, the events for that date 
will be sent to a connected printer and the display 
will show 

Printing events.

 for three seconds, 

before returning to idle text. 

 

 

Using Display Rev  

1.

 

Press the 

Display Rev ?>

 soft key. 

 

2.

 

The display will change to 

*Bosch D9412* 

Version 6-40 

 

 

(D9412 and 6-40 are used as an example, other 
panels could be D9112, D7412, D7212). 

3.

 

The display will return to idle text after 5 seconds. 

 

Using Service Walk Test 

 

 

The Service Walk Test function is only 
available in the Service Menu for D9412 
and D9112 panels. If the panel model is 
D7412 or D7212, the Service Walk Test 
will have to be enabled on the Function 
list for the command center through the 
panel’s programming. 

 

1.

 

When the display shows 

### points remain to 

be tested

 you can begin. (### is the number of 

points).