HP EW 5000 Digital Media Receiver Guide De Dépannage

wireless ad hoc troubleshooting tips

There are many steps for setting up a wireless network properly.

If you are having trouble, please read these tips for help in successfully adding

the hp digital media receiver to your wireless network.

There are two types of wireless networks: infrastructure and ad hoc.

In a wireless infrastructure network, all computers are connected through a common wireless access point device. This is the
most common type of wireless network. If you have an infrastructure network, see the infrastructure troubleshooting tips on the
reverse side of this page.

In a wireless ad hoc network, computers communicate directly with each other without a common access point. This is not as
common and may be used in smaller networks. If you have an ad hoc network (for instance, you have a PC with a wireless
adapter and no wireless access point), see the troubleshooting tips below.

For additional network terms, see the Glossary in the back of the User’s Guide.

wireless ad hoc troubleshooting

Important first steps:

• Establish a functional ad hoc network per the instructions provided with your wireless networking card. Test the network by

using another wireless device.

• Verify Windows sees the ad hoc network and the network is transmitting. There will be a broadcasting icon in your lower

right system tray, and the network will appear in your available network connections list. Click Start, Control Panel,
Network Connections and verify the wireless network appears and it is enabled.

• Disable any unused network connections in the above network list, such as a wired network connection. Right-click on the

network name and select Disable from the menu that appears.

• Verify your PC is using static IP addressing. In an ad hoc network, addresses are fixed (static), not DHCP (dynamic).

If the hp digital media receiver (DMR) cannot find your wireless network (WLan):

• Verify your wireless adapter is broadcasting its network name (called an SSID). See your wireless adapter’s User’s Guide

and check the settings. Turn on options like “broadcast network name” or turn off “silent broadcast.”

• Move the wireless PC and the DMR closer together. To run the Setup Wizard, press the home button on the remote, then

the options button. Highlight Run Setup Wizard and press select.

• Check for firmware updates for your wireless adapter on the manufacturer’s website. Update the firmware on the wireless

adapter and run the Setup Wizard again.

• If you have a large number of photos or music files, wait until the synchronizing... message box disappears.

• Verify the hp digital media server is running. The server icon will be in the lower right corner of your server PC’s screen. To

restart the media server, click Start, All Programs, hp digital media, then click Start hp digital media server.

• Verify the PC and DMR network IP addresses and Subnet masks are similar. See Page 36 of the User’s Guide to check the

network address of your PC. For the DMR, press the options button, then select Network Setup and then Address. If
they are not similar, disable your other PC network devices (see Important first steps above) and reboot your PC.

• Verify the DMR scans and locates the correct WLan (SSID) for your wireless adapter. Run the Setup Wizard if there were

any changes in the above steps.

• Verify the encryption (WEP) settings. You must use the exact same encryption key and settings on the wireless adapter and

the DMR. See page 42 of the User’s Guide for more information on setting WEP keys.

General tips:

• See the Network Setup and the Troubleshooting chapters in the User’s Guide.

• If you have a firewall, grant access permission to the hp digital media server. Try temporarily disabling the firewall to

determine whether your firewall is preventing the DMR from accessing your PC.

• Rotate the DMR antenna for better reception.