Panasonic Arbitrator 360 Mode D’Emploi

10

•  Do not remove a P2 card while 

it is being accessed, as the P2 

card may be damaged or the P2 

card slot may become disabled. 

When the recorder senses a 

disabled slot, it may reboot itself 

automatically.

•  Do not set liquid containers or 

small metal objects on the recorder 

or P2 cards.

•  Do not insert foreign objects into 

the openings of any devices.

•  Do not attempt to modify the 

recorder or P2 cards.

•  Do not use the recorder in a place 

where it or a P2 card might get wet, 

or water might get inside them.

•  The recorder is intended to work 

only with P2 cards. Do not attempt 

to use non-P2 cards, as that could 

damage the recorder.

•  When inserting a P2 card, make 

certain that it is not upside down 

or backwards, and do not attempt 

to force a bent or damaged P2 

card, as that could damage the 

card or P2 card slot.

•  While the recorder is operating 

(and especially recording), do 

not disconnect the recorder’s 

power cable (included in the 

separately sold Cable Kit). Before 

disconnecting the power cable, 

first stop all operations and turn 

the recorder off. Otherwise, the P2 

card may be damaged, or recorder 

setting files or management data 

on the P2 card may be corrupted.

•  To clean the recorder, turn the 

vehicle’s ignition switch to the 

LOCK (OFF) position, and keep 

the recorder power turned off (see 

“Off” on page 19).

•  Do not use solvents such as 

benzene, thinner or alcohol, as 

these can deform the case or 

damage the surface finish.

•  Use a soft, dry cloth to dust off the 

recorder. If severely soiled, wipe it 

with a cloth moistened with a weak 

solution of mild synthetic detergent 

and wrung out, and afterwards 

wipe with a dry cloth.

•  If using a chemically treated cloth, 

follow the instructions provided 

with it.

•  Use this unit to format new P2 cards.

(see “Format” on page 86)

•  A P2 card formatted in this unit 

contains the folders required for 

the Memory Card Video Recorder 

operation. Do not modify (delete, 

copy, move, etc.) these folders on 

a PC.

•  A P2 card whose folders have 

been modified on a PC must be 

reformatted in this unit. 

•  Since the number of recording days 

and files on a P2 card is limited, 

exceeding the maximum number of 

recording days and files will detect 

an end of card event even if there 

is space left on the card.