Panasonic Arbitrator 360 Mode D’Emploi

Operation on the Memory Card V

ideo Recorder

Notes:

• Do not try to turn the key further

than the stop position, and do not

move it unnecessarily, to prevent

damage to the key and lock.

• To prevent damage, do not exert

undue force on the open cover.

P2 card Insertion and Removal

Inserting a P2 card

(2) Insert a P2 card into the P2

card slot and push it in until

the Eject button pops out.

Do not push in
this direction.

Eject button

Insert the card
with the P2 logo
facing up.

Do not touch to avoid
the risk of injury.

(3) Fold the protruding Eject

button to the right.

Note:

After confirming that the Eject button

is folded over to the right, close the

P2 card slot cover. Otherwise the

Eject button will be damaged.

Do not insert or remove a P2 card when another P2 card is being accessed
(while the [BUSY] lamp is lit or blinking). Otherwise the P2 card may be
damaged or P2 card data may be corrupted.

(1) Open the P2 card slot cover.

Insert the key in the lock and

turn it clockwise to [ ].

Note:

The [BUSY] lamp blinks for a few

seconds when the P2 card slot

cover is opened. Make sure that

the blinking has stopped before

inserting a P2 card.

Before use

(Continued on the next page)