Panasonic Arbitrator 360 Mode D’Emploi
R E T U R N
M E N U
C O N T R O L P
A N E L
O N /
O F F
47
Operation Using the Remote Control Panel (separately sold)
Control Reference Guide of the Remote Control Panel
Front panel
LCD panel
Shows images and operation menus.
AUTO ZOOM button
∗
1, 2
Provides automatic control of zoom-in,
pause and zoom-out operation.
The officer can set zoom ratio and
pause time. (see “Zooming” on page 55)
pause and zoom-out operation.
The officer can set zoom ratio and
pause time. (see “Zooming” on page 55)
BOOK MARK button
∗
2
Press during recording or playback
to enter bookmarks. A set bookmark
displays an icon
to enter bookmarks. A set bookmark
displays an icon
on the display
for 1 to 2 seconds when pressed.
(see “Adding bookmarks” on pages
64, 67)
(see “Adding bookmarks” on pages
64, 67)
Backlight compensation button
(
)
∗
1, 2
Press to compensate for strong
backlighting. This button toggles
between ON and OFF at each press.
(see “Making a backlit image easier
to view” on page 55)
backlighting. This button toggles
between ON and OFF at each press.
(see “Making a backlit image easier
to view” on page 55)
Zoom buttons
∗
1, 2
Use these buttons to zoom out (W-
button) and zoom in (T-button).
(see “Zooming” on page 55)
button) and zoom in (T-button).
(see “Zooming” on page 55)
REC lamp
Lights or flashes during recording.
(see “Indicator Lamps and Recorder
Status” on page 110)
(see “Indicator Lamps and Recorder
Status” on page 110)
REC button
∗
2
Press to start recording video and
sound to P2 card. (see “Starting
recording” on page 63)
sound to P2 card. (see “Starting
recording” on page 63)
STOP button (
)
∗
2
Stops recording. (see “Stopping
recording” on page 63)
recording” on page 63)
AUDIO2 MUTE button/lamp
Starts/releases recording for Audio2.
Pressing this button turns the lamp
on/off. While the lamp is lit, Audio2
is not being recorded. (see “To mute
Audio2 input sound” on page 55)
IR MODE button
∗
1
Switches the IR mode to one of the
following modes.
AUTO: Automatically changes IR mode
depending on ambient brightness.
ON: Turns on the IR mode.
OFF: Turns off the IR mode.
CAMERA SELECT button
Each press of the button toggles the
recorder between the [CAMERA1]
and [CAMERA2] connector inputs.
(see “Selecting a camera” on page 55)
Volume control buttons ( )
Adjusts speaker sound volume.
Brightness buttons ( )
Adjusts LCD panel brightness.
∗1 A commercially available camera connected to the [CAMERA2] connector cannot be controlled.
∗2 The lamp turns on when the [CONTROL PANEL ON/OFF] button is set to ON.
Additional Information on Operation