Manualsbrain.com
  1. Manuels
  2. Marques
  3. Panasonic
  4. Arbitrator 360
  5. Mode D’Emploi

Panasonic Arbitrator 360 Mode D’Emploi

Télécharger
Page de 140
59
Operation Using the Remote  Control Panel (separately sold)
Viewing Live Video 
(continued)
To turn off the [REC] lamp during recording
The Color Camera [REC] lamp lights 
during recording. The following steps 
allow you to keep this lamp off at all 
times.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [ , ] buttons to select 
[Setup/Info] and press [ ] to 
confirm the entry.
3.  Use the [ , ] buttons to select 
[Camera LED].
4.  Use the [ , ] buttons to select 
“OFF”.
The lamp will now remain off at all 
times.
Selecting Audio2 input
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [ , ] buttons to select 
[Audio] and press [
] to 
confirm the entry.
3.  Use the [ , ] buttons to select 
[Audio2 Select].
4.  Use the [ , ] buttons to select 
“INCAR”, “WMIC” or “LINK 
CAM”
INCAR :
    Sound input through the [IN CAR 
MIC] terminals
WMIC (Wireless Microphone) :
    Sound input through the [AUDIO 
IN 2] terminals
LINK CAM :
    Being linked with the change of 
camera, sound input changes.
∗
Checking audio
Sound output is normally off when 
viewing live video. Use the following 
steps to check that sound is input 
normally.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [ , ] buttons to 
select [Audio] and press [ ] 
to confirm the entry.
3.  Use the [ , ] buttons to select 
[Audio1 Test] or [Audio2 Test], 
and then press the [ ] button.
Sound is output while the [
] button 
is depressed.
Note:
The output sound may be too loud 
depending on the sound volume 
setting. Lower the sound volume as 
required.
∗  Changing to the [CAMERA1 (CAMERA2)] connector input, sound comes from the 
[AUDIO IN 2 (IN CAR MIC)] connector input.