Panasonic Arbitrator 360 Mode D’Emploi
63
Operation Using the Remote Control Panel (separately sold)
Recording
Starting and stopping recording
Starting recording
Press the [REC] button.
This starts video and sound recording.
The live screen appears automatically
if not already on. The Remote Control
Panel, the Color Camera and this unit
[REC] lamps go on during recording.
The live screen appears automatically
if not already on. The Remote Control
Panel, the Color Camera and this unit
[REC] lamps go on during recording.
Note:
The Color Camera [REC] lamp
goes on regardless of camera input
setting (for example, the [CAMERA2]
connector input being selected with
the [CAMERA SELECT] button).
goes on regardless of camera input
setting (for example, the [CAMERA2]
connector input being selected with
the [CAMERA SELECT] button).
There are also other methods for
starting recording. For details, refer
to “Recording” on page 21.
starting recording. For details, refer
to “Recording” on page 21.
Stopping recording
Press the [STOP] button ( ).
Pressing the [STOP] button turns off
the [REC] lamp and video and sound
recordings stop when the post record
the [REC] lamp and video and sound
recordings stop when the post record
∗
interval has elapsed. Then the [BUSY]
lamp goes off.
lamp goes off.
There are also other conditions for
stopping recording. For details,
refer to “Stopping Recording” on
pages 22, 23.
stopping recording. For details,
refer to “Stopping Recording” on
pages 22, 23.
∗ Post record is a function that continues recording for a preset interval after
recording is turned off. Changing the setting requires administrator setup.