Panasonic Arbitrator 360 Mode D’Emploi
83
Administrator Operations on the Remote Control Panel (separately sold)
Management of Officer Setup
Setting Method
Use one of the following methods to
enter officer data.
AUTO : Automatically reads and
enter officer data.
AUTO : Automatically reads and
loads officer data for up to
two persons from a USB
memory device.
two persons from a USB
memory device.
MANUAL : Display the menu on the
LCD panel, and then read
in and configure officer
data from a USB memory
device on the Officer setup
top screen.
in and configure officer
data from a USB memory
device on the Officer setup
top screen.
LIST : Display the menu on the
LCD panel and allow you
to set the officer data by
selecting from the list
on the Officer setup top
screen after reading in
the officer data already
stored on this unit.
to set the officer data by
selecting from the list
on the Officer setup top
screen after reading in
the officer data already
stored on this unit.
Operation Key Lock
This function locks buttons other
than the [REC], [MENU], [CONTROL
PANEL ON/OFF] and [RETURN]
buttons, the [REC] button on this
unit, and the [REC] button on the
Color Camera.
Setting : ON, OFF
than the [REC], [MENU], [CONTROL
PANEL ON/OFF] and [RETURN]
buttons, the [REC] button on this
unit, and the [REC] button on the
Color Camera.
Setting : ON, OFF
Notes:
• When a USB memory device
containing administrator data is
connected, you can press the
[MENU] button to enter the Setup/
Admin top screen via the menu
items. Set [Management Mode]
– [Operation Key Lock] setting to
“OFF” in administrator setup to
release key lock.
connected, you can press the
[MENU] button to enter the Setup/
Admin top screen via the menu
items. Set [Management Mode]
– [Operation Key Lock] setting to
“OFF” in administrator setup to
release key lock.
• The key lock is activated for the
first time when you move to the
live screen.
live screen.
• The [LOCK] lamp indicates
whether the keys are locked.
• Although the key lock function is
available in officer setup, when
locked by administrator setup, the
keys cannot be unlocked from
officer setup.
locked by administrator setup, the
keys cannot be unlocked from
officer setup.
• The Color Camera zoom and
brightness buttons cannot be
locked.
locked.
• Trigger signal (GPIO1-8) control
(see page 37) is not locked.
Management Mode
Administrator Setup
(continued)
Radar Model
Baud Rate
Setting (bps) : 1200, 2400,
4800, 9600,
19200, 38400
19200, 38400
Bit Length
Setting (bit) : 7, 8
Stop Bit
Setting (bit) : 1, 2
Parity
Setting : NONE, ODD, EVEN
Model Select
ProLaser3 :
The unit is set to support Kustom
The unit is set to support Kustom
Signal’s ProLaser3 as standard.
To use the unit with other radar
guns, consult your supplier.
To use the unit with other radar
guns, consult your supplier.
Others_Analyzed_PC :
Select when processing data on
Select when processing data on
a PC. For details, consult your
supplier.
supplier.
Addition of Model
Consult your supplier.
If you open the Addition of Model
screen by mistake, press the
[Cancel] button to exit.
If you open the Addition of Model
screen by mistake, press the
[Cancel] button to exit.
Radar/GPS