Panasonic Arbitrator 360 Mode D’Emploi

110

111

Set if GPI triggers are used or not. 

ON: The GPI triggers are used.
OFF: The GPI triggers are not used.

When GPI triggers are used, set the names, action 

when a trigger is detected, detection conditions, and 

trigger IDs to be displayed on the screen. Page 1 is the 

setting screen for Triggers 1-8, and Page 2 is that for 

Triggers 9-16. To change the setting screens, click on 

the [Next] or [Prev] button.

Specify a name with a maximum of 15 characters. 

Set an action to be taken when a trigger signal is 

detected.
<Trigger.1-16>

NONE: No action
REC: Recording starts.
STOP: Recording stops.
AUTOZOOM: Automatic zooming is performed.
CAM1LED: The [REC] lamp of the color camera is 

turned ON or OFF.

P1: Video specified in Preset1 is selected.
P2: Video specified in Preset2 is selected.
P3: Video specified in Preset3 is selected.
P1REC: Video specified in Preset1 is recorded.
P2REC: Video specified in Preset2 is recorded.

P3REC: Video specified in Preset3 is recorded.
AUDIO2ON: A signal input to [AUDIO IN 2] is 

recorded.

AUDIO2MUTE: A signal input to [AUDIO IN 2] is 

not recorded.

TGT(REC): Recording starts with a TGT input.
TGT(P1REC), TGT(P2REC), TGT(P3REC):  Video 

specified in Preset1, Preset2, or Preset3 is 

recorded with a TGT input. 

OWN(REC): Recording starts with an OWN input.
OWN(P1REC), OWN(P2REC), OWN(P3REC):  Video 

specified in Preset1, Preset2, or Preset3 is 

recorded with an OWN input. 

The TGT and OWN triggers are generated when the 
speed of a target vehicle and your vehicle, respectively, 
exceeds the specified speeds. 
TGT and OWN can be set to either Trigger 15 or 
Trigger 16, but not to both of them.

•

•