Honeywell 805595 Manuel D’Utilisation
IQ8Wireless transponder for wall mounting
30
FB 798941 / 10.06
9 Assembly
The IQ8Wireless transponder should be installed with suitable fixing material (such as wall
plugs and screws) in the proper position on a stable wall surface with no mechanical stress of
the housing. The mounting place location of the IQ8Wireless transponder should be chosen so
that a good wireless link (field strength) between the transponder and the assigned
IQ8Wireless detector bases is guaranteed. The transmission quality can be checked with the
programming software tools 8000 version V1.09 or higher.
plugs and screws) in the proper position on a stable wall surface with no mechanical stress of
the housing. The mounting place location of the IQ8Wireless transponder should be chosen so
that a good wireless link (field strength) between the transponder and the assigned
IQ8Wireless detector bases is guaranteed. The transmission quality can be checked with the
programming software tools 8000 version V1.09 or higher.
172
120
Top
39
Fig. 15: Fixing points on the back of the housing (sizes in mm)
On the front side of the housing there are 4 LED status indicators, each with its own inscription
field, as well as the housing screw.
On the front side of the housing there are 4 LED status indicators, each with its own inscription
field, as well as the housing screw.
LED 1
LED 2
LED 3
LED 4
200
280
Top
1
144
A
red green
B
red green
Fig. 16:IQ8Wireless transponder in housing with display LED and aerials (sizes in mm)
Observe that the IQ8Wireless transponder must not be installed on walls with
metal grating or which are filled with aluminium foil-insulated glass wool and
which could thus seriously affect the wireless communication.
metal grating or which are filled with aluminium foil-insulated glass wool and
which could thus seriously affect the wireless communication.