BENDIX TCH-013-004 Manuel D’Utilisation
Technical
Bulletin
Bulletin No: TCH-013-004-A
Effective Date: 4/1/97
Cancels: N/A
Page: 1 of 3
THOMAS BUILT - ANTILOCK CONTROLLER GROUNDING
It has come to our attention that some older Thomas Built buses using the Bendix antilock system require a system
ground change. Contact Thomas Built for additional information or check that the antilock system is grounded as
illustrated. The following instructions are obtainable from Thomas Built.
ground change. Contact Thomas Built for additional information or check that the antilock system is grounded as
illustrated. The following instructions are obtainable from Thomas Built.
Ground Screw
Voltage Box (Electrical Connection Box)
Figure 1
Locating the Voltage Box
The instructions presented here MUST BE USED on Thomas Built Buses equipped with Bendix AntiLock. The
antilock controller voltage ground should be moved from the electrical bus bar in the voltage box, to the voltage
box ground screw.
antilock controller voltage ground should be moved from the electrical bus bar in the voltage box, to the voltage
box ground screw.