Euphonix Studio Hub SH612 Manuel D’Utilisation
Euphonix SH612 Studio Hub User Guide
Standalone MADI Routing
23
To create a route:
1.
Select the Signal Source device to Route from.
The device’s outputs are displayed in the window below.
2.
Select the Signal Destination device to route to.
The device’s inputs are displayed in the window below.
3.
Select the output channel from the Signal Source and the input channel from
the Signal Destination.
the Signal Destination.
4.
Click the Route Selection button to make the connection.
Save this new route as a new Patch as described below.
•
You can route banks of 2, 4, 6, 8, 12, 24 or all channels by using the channel
width buttons. You can also link the channel size selection with the Link
Channel Size button.
width buttons. You can also link the channel size selection with the Link
Channel Size button.
•
To clear a route, select the input channel to reset and click the Clear Selection
button.
button.
•
All changes to a route are immediate and there is no undo function.
3.2.3
Saving Patches
Once your MADI connections have been defined, you must save your settings.
1.
Select the Configurations and Patches tab.
2.
Select your Patch.
3.
Press the Store button.
To recall a Patch for viewing, editing, or activation in the Studio Hub, select the desired
Patch and click the Recall button.
Patch and click the Recall button.