Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount Mode D’Emploi

Is the Wireless LAN unit connected?

Check that the Wireless LAN unit is securely connected.

Is the SSID the same as that of the access point?

(For Quick Connection Mode)

Set an SSID that is different from that of the access point.

You can make the SSID setting from the projector's Network menu.

See your projector User’s Guide for details.

Is the DHCP function for Wired LAN turned On?

(For Quick Connection Mode)

Set the DHCP setting to Off from Wired LAN in the Configuration menu.

See your projector User’s Guide for details.

Is the computer's wireless LAN function working?

Check that the wireless LAN adaptor or wireless LAN card is installed on the computer.

Is the wireless LAN setting enabled when the computer is 
in power save mode?

Enable the wireless LAN.

Are there any obstacles between the access point and the 
computer or projector?

Sometimes the indoor environment prevents the projector from being found in a search. Check for 
any obstacles between the access point and the computer or projector, and change their position to 
improve the communication.

Is the computer's wireless LAN radio strength set to low?

Set the radio strength to maximum.

Does the wireless LAN system meet the supported 
specifications?

Check the wireless LAN system. See your projector User’s Guide for details on the projector's wireless 
LAN system.

Is the Wireless LAN Power set to Off in the projector's 
Configuration menu?

Set Wireless LAN Power to On in the Wireless LAN menu from the Configuration menu.

See your projector User’s Guide for details on the projector's wireless LAN settings.

Is the AirPort setting for Mac OS correct?

Check that AirPort is set to on. Or, check whether an appropriate access point has been selected.

Is the same WEP key set?

When selecting WEP from Security, set the access point, the computer, and the projector to the same 
WEP key.

See your projector User’s Guide for details on the WEP key.