Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount Mode D’Emploi

Are the computer's LAN card and the built-in LAN function 
available?

Check that LAN is available from the device manager under Control Panel - System - Hardware. 

Is the network cable connected correctly?

Check that the network cable is connected correctly. Reconnect it if it is not connected or not 
connected properly.

Is the network configuration screen displayed on the 
projector?

Close network settings on the projector, and return to the LAN standby screen. If the network 
configuration screen is displayed on the projector, you cannot connect using EasyMP Network 
Projection.

Was the network adapter used selected correctly with 
EasyMP Network Projection?

If the computer has multiple LAN environments, it cannot connect unless the network adapter is 
selected correctly. When using a computer running Windows, start EasyMP Network Projection and 
select the network adapter you are using from Set options - Switch LAN.

s

Is the firewall turned off, or has the firewall been 
registered as an exception?

When you do not wish to turn off the firewall or register the firewall as an exception, make the 
necessary settings to open the ports.

The ports used by EasyMP Network Projection are "3620", "3621", and "3629".

Is the SSID setting different?

(For Advanced Connection Mode)

Set the computer, the access point, and the projector to the same SSID.

You can make the SSID setting from the projector's Network menu.

See your projector User’s Guide for details.

Are the connection denial functions, such as MAC 
Address

 restrictions and port restrictions, set correctly at 

the access point?

(For Advanced Connection Mode)

Set connection permission at the access point to allow projectors to connect.