Emerson 5-In-One Learning Light-Up Remote Manuel Du Propriétaire

10

Preparation

3. On the remote control, press the desired device key

(

, 

, 

, 

, or 

).

Note: For TV/VCR combinations, press 

 and

use the VCR code listed for your model under “TV-
VCR Combo Codes” on Page 38. If your TV/VCR
combination also lists a TV code, you must program
the TV separately by repeating Steps 3–5 to add
volume control. In Step 3, press 

, then in step 4

enter the TV code.

4. Hold down 

 until the remote’s red light blinks twice,

then release 

 and enter the first 4-digit manufac-

turer’s code for the desired device. When the red
light blinks twice, the remote control has accepted
the code.

For example, to set up the remote control of a Pana-
sonic TV (manufacturer’s code 0051), press 

,

hold down 

 until the red light blinks twice, release 

and press 

.

Note: If you entered the code incorrectly, the red
light emits one long blink.

5. Point the remote control at the desired device and

press 

. The device should turn off.

If the remote control does not operate your device,
try the other codes listed in “Manufacturers’ Codes”
for your type and brand of device. Otherwise, use
the search method to find a working code — see
“Using Manual Code Search” on Page 20.

6. Repeat Steps 2–5 to program other devices.

Note: If the remote control does not operate all
device functions, try using another code in the list
that may be more compatible.

Once you have programmed channels into a favorite
channel table, you can scan up to ten favorite channels
for a desired device.