BENDIX SD-13-4767 Manuel D’Utilisation

Page de 32
1
®
Bendix
®
 TABS-6 Trailer ABS Module
FIGURE 1 - TABS-6 STANDARD AND PREMIUM MODULES
INTRODUCTION
The Bendix
®
 TABS-6 module is an integrated trailer ABS 
controller and modulator for air-braked heavy-duty trailers, 
semi-trailers and dollies.  The module acts as a relay valve 
during normal braking, but during ABS events, it will intervene 
to help improve stability.  All modules include an Electronic 
Control Unit (ECU) and Modulator Relay Valve (MRV) which are 
integrated into a single self-contained 2S/1M (two-sensor, one 
modulator) trailer ABS unit. The Premium TABS-6 module is 
auto-confi gurable to control more sensors and modulators (up to 
4S/3M) from its default 2S/1M.  
Bendix
®
 TABS-6 modules also feature:
  •  Internal electrical connections to the primary MRV, 
eliminating the need for external pigtail harnesses.
  •  Optional mounting to the service reservoir or to the chassis, 
without additional brackets. 
  •  Blink code diagnostics and support for advanced diagnostic 
tools. 
  •  Support for Power Line Carrier (PLC) communication to the 
towing vehicle.
  •  A pressure equalizing valve in the sealed ECU housing to 
give improved protection from water, etc. 
  •  A locking dust cover to provide additional electrical connector 
and cable protection. 
  •  A serviceable nylon fi lter to help prevent foreign material 
from entering the control port. 
  TABLE OF CONTENTS 
PAGE
  General System Information 
  Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
  Safe Maintenance Practices. . . . . . . . . . . . . . . . . . .2
  Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
 Mounting Confi gurations. . . . . . . . . . . . . . . . . . . . . .2
  PLC Communications. . . . . . . . . . . . . . . . . . . . . . . .2
  Wiring Harness (Pigtail)  . . . . . . . . . . . . . . . . . . . . . .3
  Power and Ground . . . . . . . . . . . . . . . . . . . . . . . . . .4
  ABS Indicator Lamp  . . . . . . . . . . . . . . . . . . . . . . . . .4
  Wheel Speed Sensors  . . . . . . . . . . . . . . . . . . . . . . .5
 BR9235
 ABS Modulator Valves  . . . . . . . . . . . . . . .5
  J1708/J1587 Diagnostic Link  . . . . . . . . . . . . . . . . . .6
  Auxiliary I/O  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
 ABS Flex
 Program  . . . . . . . . . . . . . . . . . . . . . . . . .6
  Customer Scratch Pad . . . . . . . . . . . . . . . . . . . . . . .6
  Power-up Sequence . . . . . . . . . . . . . . . . . . . . . . . . .6
  ABS Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
 Auto-Confi guration  . . . . . . . . . . . . . . . . . . . . . . . . . .8
  Odometer Function. . . . . . . . . . . . . . . . . . . . . . . . . .8
  Non-standard Tire Size. . . . . . . . . . . . . . . . . . . . . . .8
  Diagnostic Trouble Code Detection  . . . . . . . . . . . . .8
  Partial ABS Shutdown. . . . . . . . . . . . . . . . . . . . . . . .9
  Blink Code Diagnostics. . . . . . . . . . . . . . . . . . . . . . .9
  Diagnostic Trouble Codes (DTCs)  . . . . . . . . . . . . .10
  Using Hand-Held or PC-Based Diagnostics . . . . . .13
 Bendix ABS Diagnostic Tools  . . . . . . . . . . . . . . . . .13
  Contacting Bendix. . . . . . . . . . . . . . . . . . . . . . . . . .14
  Servicing the TABS-6 Module. . . . . . . . . . . . . . . . .15
  Removing the TABS-6 Module . . . . . . . . . . . . . . . .15
  Service Replacement of Other ABS Controllers . . .15
  Reinstallation of the TABS-6 Module  . . . . . . . . . . .15
  Leakage And Operational Tests  . . . . . . . . . . . . . . .16
  ABS Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
  Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . 17-31
3/4" NPT 
Supply Port
Through-holes 
for Frame
(Chassis) 
Mounting
Wheel Speed 
Sensor
Connectors
ECU Pin-out Label 
(See Page 31)
ECU Cover 
(Sealed)
ECU Connector 
Cover
(Removable)
Four (4) 3/8" NPT 
Delivery Ports
(To Brake Chambers)
3/8" NPT Control 
Port with
Integral Filter
The ECU Connector
Varies for Standard and 
Premium - See Chart 
Integrated 
Modulator
Relay Valve
Part Number
Label
(See Page 31)
To Remove Cover Slide 
Lock Tab
The Premium TABS-6
 
Module uses an 
18-Pin Connector
The Standard TABS-6
 
Module uses a
5-Pin Connector 
SD-13-4767