Bühler 2895 Manuel D’Utilisation
bühler
Allied Front-End Loader
INSTALLING / REMOVING LOADER ATTACHMENTS
Installing:
1.
Position tractor centrally within the
bucket hooks. Dump Quick-tach slightly from
vertical position. Slowly drive the tractor
forward until the Quick-tach contacts the
bucket.
vertical position. Slowly drive the tractor
forward until the Quick-tach contacts the
bucket.
2.
Slowly raise the loader to engage the
Quick-tach within both bucket hooks. When
both hooks are resting on the Quick-tach
rollback the bucket. Shut tractor off. Lock
using both Quick-tach pins and secure with
hairpin clips.
both hooks are resting on the Quick-tach
rollback the bucket. Shut tractor off. Lock
using both Quick-tach pins and secure with
hairpin clips.
CAUTION
Verify attachment installation from tractor seat by
lowering level attachment to ground and retracting the lift cylinders.
Removing:
1.
Rollback attachment and lower near
ground position. Shut tractor off.
2. Remove both Quick-tach pins and place in
storage position. Place level attachment on
ground. Slowly dump attachment while
backing tractor away.
storage position. Place level attachment on
ground. Slowly dump attachment while
backing tractor away.
- 21 -
P4110
Pin in lock
position.
Pin in storage position