Whirlpool W10258095A Manuel D’Utilisation
6
Electrical Connection
1. Disconnect power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range.
3. Remove plastic tag holding three #10-32 hex nuts from the
middle post of the terminal block.
4. Add strain relief.
Style 1: Power supply cord strain relief
■
Assemble a UL listed strain relief in the opening.
■
Feed the power supply cord through the strain relief on
the cord/conduit plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
the cord/conduit plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
■
Tighten strain relief screw against the power supply cord.
Style 2: Direct wire strain relief
■
Use Phillips screwdriver to remove screws and rotate/
conduit plate 180º.
conduit plate 180º.
Power Supply Cord
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
A. UL listed strain relief - large opening
B. Small opening
B. Small opening
A. Large opening
B. Small opening
B. Small opening
A
B
A
B