Whirlpool RF110AXS Manuel D’Utilisation

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with stainless steel-wool 
pad.

■

Oven cleaner: Follow product label instructions.

■

Mildly abrasive cleanser: Scrub with wet scouring pad.

■

Dishwasher

Gas Grate and Drip Pan Cleaner Part Number 31617 (not 
included):

See “Assistance or Service” section to order.

Do not remove the cooktop to avoid product damage.

For more information, see “Lift-up Cooktop” section.

■

Steel-wool pad

■

Glass cleaner and paper towels or nonabrasive plastic 
scrubbing pad: Apply glass cleaner to soft cloth or sponge, 
not directly on panel. 

■

All-Purpose Appliance Cleaner Part Number 31662 (not 
included):

See “Assistance or Service” section to order.

BROILER PAN AND GRID (on some models)

Do not clean in the Self-Cleaning cycle.

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water: 

Soak for 20 minutes, then scrub with scouring or steel-wool 
pad.

■

Oven cleaner: Follow product label instructions.

■

Dishwasher

STORAGE DRAWER 

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

■

Mild detergent

Remove all stored items from drawer and lift out drawer liner.

■

Clean with mild detergent

■

All-Purpose Appliance Cleaner Part Number 31662 (not 
included):

See “Assistance or Service” section to order.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.