SSI America Video Gaming Accessories 9200 Manuel D’Utilisation

SSi Manual SERIES 9200

20                                              Programmable Dual-loop

Configuration Menu

The Configuration Menu is entered through the “Menu” key that is part of the 6-buttons running down the

right side of the “default” display screen.  Pressing the “Login” key that is below the blue “UP” and “DOWN”

arrow keys displays a numeric keypad. Enter the correct passcode for the configuration level and press the

“Enter” key. This displays the following configuration options:

Program Edit
Selecting this “program edit” button pops up another screen which asks the operator to enter a program

number to be edited. Enter “0” to edit a blank program.  To ERASE/DELETE an existing recipe/program you

need to “SAVE” it as Program Zero (0). Program “0” is a “NO-OPT” program.
When you enter a number for a stored program and push the “Enter” key the program steps are displayed.

Using the “up” and “down” arrow keys you select the step in the existing program that you wish to edit.
Move the cursor to that step and press the “Enter” key. The next screen to pop up will show the step’s

“parameter” and it’s “value”.
NOTE: A list of “opcodes” appears in the Appendix of this manual.
Example:
Parameter equals “OPCODE”, Value equals “SOAK”.
Parameter equals “TIME”, Value equals “3:45”
Highlighting the “Opcode” and “soak” and pressing the “Enter” key brings up a screen that shows all of the

possible “OPCODES”. Selecting the “OPCODE” that you want to use for the program step that you are

editing and pressing the “Enter” key.
If you desire to change the “time”… highlight the time and press the “Enter” key. The next screen is the

“time edit” screen. To change the “hour” press the “hour” key in the upper right-hand corner. If you want