SSI America Video Gaming Accessories 9200 Manuel D’Utilisation

SSi Manual SERIES 9200

18                                              Programmable Dual-loop

Chart

The “Chart” display shows between 15 minutes and 7 days of process variable data on the screen, and can

be scrolled back to view all of the data stored on the hard drive (72 hours at a time).  The vertical timelines

change as the time changes on the screen. A chart is available for the “LP1 and LP2” only and a chart is

available for the ”LP1 and LP2 plus their setpoints”. You can toggle between the two charts by pressing the

“PREV” and the “NEXT” keys.

The “Prev” and “Next” arrows change the display from one chart to another (i.e. from just process variables

to process variables and setpoints.)
The blue “RIGHT” and “LEFT” arrows move the displayed chart along the horizontal axis, going back and

forward in time and then returning to real time.
The “+” and “ – “ keys change the time window displayed on the screen.
The “Note” key allows the operator to enter a note on the chart, similar to writing on a paper chart. The

note shows up when the chart is printed out using the utility software included with the Series 9000

instrumentation. The interface must be the ADVANTECH 5.7 inch with the flash card.
Pressing the “Note” key displays an alpha/numeric keypad asking for operator ID or Initials. Pressing the

appropriate keys and then pressing the “<- Enter” key displays another alpha/numeric keypad and prompts

the operator to enter a note. After pressing the keys on this keypad and then “<- Enter” key the next

screen displayed asked you where you want the note written. The default choice is the current time and

date. You can change the parameters and place the note at whatever time and date  is required. Pressing

the “OK” key takes you back to the real time chart page.
Pressing the “Realtime” key bring the chart display back to the current time.
The “View” key allows you to look at the “NOTES” that have been stored with the chart.