Rane Microphone MS 1S Fiche De Données
Data Sheet-1
MS 1S
MICROPHONE STAGE
General Description
The Rane MS 1S Mic Stage preamplifier
provides the answer when you need just
one microphone input in an otherwise
line-level world. Give us a call to go from
either a dynamic, condenser or electret
microphone to a line-level input with a
minimum of noise, distortion, cost and
hassle.
The MS 1S provides 48 V switchable
Phantom Power with an indicator LED,
continuous rotary Gain trim between 15
dB and 60 dB, Signal/Overload LED, and
XLR balanced Input & Output connec-
tors. A Polarity switch and high-current
cross-coupled output line driver round out
the features.
The MS 1S utilizes one of the finest
ultra low noise amplifier designs available.
Featuring a true differential input with
high common-mode rejection, use of the
MS 1S guarantees performance usually
found only in mixing consoles costing
thousands of times as much. Of course,
for all of that extra money you receive a
proportional increase in KPSI (knobs per
square inch).
The MS 1S replaces the MS 1B Mic
Stage with a new internal universal power
supply. The width increases by one inch,
all other features are the same.
Features
• -127 dB Equivalent Input Noise
• Gain Control
• Signal / Overload Indicator
• Polarity Switch
• Gain Control
• Signal / Overload Indicator
• Polarity Switch
DATA SHEET / MANUAL
• Switchable 48 V Phantom Power
• True Differential Input
• Cross-coupled Line Driver
• Internal 100-240 VAC Power Supply
• True Differential Input
• Cross-coupled Line Driver
• Internal 100-240 VAC Power Supply