VIZIO TL-WR641G Manuel D’Utilisation

 

 

- 40 - 

Service Port list does not have the service that you want to use, type the number of the 

service port or service port range in the Service Port box. 

3.  Type the IP Address of the computer in the Server IP Address box.  

4.  Select the protocol used for this application, either TCP or UDP, or All. 

5. Select 

the 

Enable checkbox to enable the virtual server. 

6. Click 

the 

Save button.   

Figur

e 4-30 

)

It is possible that you have a computer or server that has more than one type of available service. 

If so, select another service, and enter the same IP Address for that computer or server. 

To modify or delete an existing entry: 

1. Click 

the 

Modify in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and Click the Previous button to return the 

previous page. 

)

If you set the virtual server of service port as 80, you must set the Web management port on 

Security –> Remote Management page to be any value except 80 such as 8080. Or else there 

will be a conflict to disable the virtual server.