VIZIO TL-WR641G Manuel D’Utilisation

 

 

- 42 - 

3.  Select the protocol used for Trigger Port from the pull-down list, either TCP, UDP, or All. 

4.  Enter the range of port numbers used by the remote system when it responds to the PC's 

request. 

5.  Select the protocol used for Incoming Ports Range from the pull-down list, either TCP or 

UDP, or All. 

6. Select 

the 

Enable checkbox to enable.   

7. Click 

the 

Save button to save the new rule. 

Figur

e 4-32 

There are many popular applications in the Popular Application list. You can select it, and the 

application will fill in the Trigger Port, incoming Ports Range boxes and select the Enable 

checkbox. It has the same effect as adding a new rule. 

To modify or delete an existing entry: 

1. Click 

the 

Modify in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

)

1)  When the trigger connection is released, the according opening ports will be closed. 

2)  Each rule allowed to be used only by one host on LAN synchronously. The trigger connection 

of other hosts on LAN will be refused. 

3)  Incoming Port Range cannot overlap each other.