Vauxhall Combo Manuel Du Propriétaire

Picture no: 11647s.tif

7. Screw in wheel bolts and tighten 

slightly, inserting the wheel bolt 

wrench 3 as far as possible. 
On some model variants, the wheel trim 

must be positioned before the wheel 

bolts are tightened.

8. Lower vehicle. 

9. Tighten wheel bolts crosswise, putting 

on wheel bolt wrench 3 as far as 

possible.
Alloy wheels 3: put hub cap on and 

engage, inserting pin on rear of hub 

cap into relevant hole in wheel.
Alloy wheels with anti-theft lock 3: 

put hub cap on. Insert and tighten 

anti-theft lock 3.

10. Before refitting the wheel trim, clean the 

wheel around the retaining clips. Valve 

symbol 3 on back of wheel trim must 

point towards valve on wheel.
Align and engage hub cap or wheel 

trim 3 and wheel bolt caps 3.

11. Stow the replaced wheel, tools and 

warning triangle - see pages 148, 151.

12. Check the tyre pressure of the newly 

fitted wheel. Adjust as necessary. 

13. Have the tightening torque of the wheel 

bolts on the new wheel checked on the 

vehicle using a torque wrench as soon 

as possible and, if necessary, corrected. 

Tightening torque – see page 205. 

14. Replace the faulty tyre on the wheel 

that was removed. 

15. Replace the temporary spare wheel 3 

with a full specification wheel without 

delay.