Stow Grinder DFG Series Manuel D’Utilisation

 

 

The DFG Series SURFACE GRINDER is shipped 
from the factory secured on a specially designed 
wooden pallet and protected from external damage 
by a corrugated carton or wood crate. If shipped with 
a corrugated carton, the SURFACE GRINDER can 
be secured to the pallet by wood laths nailed to the 
pallet body. Remove the carton or crate immediately 
upon receipt using suitable tools to remove the nails. 
 
REMOVING THE SURFACE GRINDER FROM THE 
PALLET. 
 
Application: All Models 
 
Tools Required: 
 
1 each, pliers. 
1 each, claw hammer or a hammer and an 
appropriate pry bar. 
 
The SURFACE GRINDER is secured to the pallet 
with steel banding. Using the pliers, cut and remove 
the banding. The SURFACE GRINDER can then be 
removed from the pallet. 
 

 

 

WEAR SAFETY GLASSES AND OTHER 
APPROPRIATE SAFETY APPAREL WHEN 
CUTTING THE STEEL BANDING AND/OR 
REMOVING THE CORRUGATED/WOOD 
SHIPPING CRATE. 
 
Visually inspect the shipment for freight damage 
and/or missing parts. If shipping damage is evident, 
contact the delivering carrier immediately to arrange 
for an inspection of the damage by their claims 
representative. Federal law requires that a claim be 
filed within a specific time period. If missing parts are 
detected, notify your dealer who will assist you in 
obtaining them. 
 
The SURFACE GRINDER is shipped from the 
factory completely assembled. If ordered with the 
SURFACE GRINDER, multi-accessory attachments 
are normally shipped separately to minimize the 
potential for loss during shipment. 
 
Check all fasteners for proper security. Consult a 
fastener torque chart for the proper torque value if 
any fastener is found to require retorquing. 
 
After April 1, 1996 all SURFACE GRINDERS are 
shipped from the factory with the SG24-1000 Safety 

and Dust Shield Assembly Kit included as a 
standard accessory. The kit is included in a separate 
package and is not normally installed by factory 
personnel. The owner and/ or operator (has) have 
the option to install the skirt assembly for any 
specific job application. The DFG-1000 Safety and 
Dust Shield is designed to perform the following job 
functions: 
 
1)  To contain loose materials within the platform 

area of the SURFACE GRINDER as a direct 
result of a specific grinding process. This 
includes materials removed from the surface as 
well as any slurry mixture utilized to help 
maximize material removal efficiencies. 

2)  To provide a method for a vacuum system to 

help remove airborne dust related materials from 
within the skirt assembly. Dust related materials 
are usually created as a result of the grinding 
process. A specific job application may require 
the reduction and/or minimization of airborne 
dust related materials from the atmosphere 
while the SURFACE GRINDER is being 
operated. The kit includes a hose and necessary 
hardware to connect the skirt assembly to the 3 
inch diameter vacuum attachment fitting located 
at the rear of the machine. Use of the kit along 
with a suitable vacuum system will not 
completely remove all airborne and loose 
materials directly from the work surface.