Simrad SIMRAD HS50 Manuel D’Utilisation
Simrad HS50 Heading Sensor
16
20221081 / F
Bracket mounting (option)
An optional bracket, part no. 22084941, may be ordered from
Simrad.
Simrad.
Note!
When the Display unit is bracket-mounted, it is not
weatherproof from the back due to a breathing hole in the back
cabinet. When bracket-mounted, the exposed parts of the plugs
should be protected against salt corrosion.
weatherproof from the back due to a breathing hole in the back
cabinet. When bracket-mounted, the exposed parts of the plugs
should be protected against salt corrosion.
1
Locate the cradle on the mounting site and mark the 4
holes for the screws on the mounting surface.
holes for the screws on the mounting surface.
2
Drill the 4 holes and screw the cradle to the mounting
surface.
surface.
3
Remove the front panel corners, and use the supplied
screws to fasten the Display unit to the left and right
brackets.
screws to fasten the Display unit to the left and right
brackets.
4
Apply the front panel corners.
5
Use the two locking knobs to assemble the cradle with the
left and right brackets and adjust the Display unit for the
best viewing angle.
left and right brackets and adjust the Display unit for the
best viewing angle.
6
Connect the cable from the Processing unit to the Display
unit connector.
unit connector.