Sanyo VSP-3000 Manuel D’Utilisation
Preparations
16
Menu settings
5
Sleep setting
You can set the system controller to turn off
automatically if it is not operated for a certain
period of time. When this is done, a moving
“SLEEP MODE” display will appear in the menu
display.
(Default setting: OFF)
automatically if it is not operated for a certain
period of time. When this is done, a moving
“SLEEP MODE” display will appear in the menu
display.
(Default setting: OFF)
1
Move the joystick up or down to
select “7. SLEEP”.
select “7. SLEEP”.
[ó
ñ MAIN MENU †]
7.SLEEP: OFF
2
Move the joystick to the left or
right to select the time (Example: 1
(HOUR)).
right to select the time (Example: 1
(HOUR)).
[ó
ñ MAIN MENU í]
7.SLEEP: 1(HOUR)
Available settings:
OFF, 1(MIN), 5(MIN), 10(MIN), 30(MIN),
1(HOUR)
1(HOUR)
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
When the specified sleep mode is reached,
the following display will appear.
return to the initial screen.
When the specified sleep mode is reached,
the following display will appear.
VSP-3000
SLEEP MODE
6
Buzzer setting
This sets the buzzer when the system controller is
operated.
(Default setting: OFF)
operated.
(Default setting: OFF)
1
Move the joystick up or down to
select “8. BUZZER”.
select “8. BUZZER”.
[ó
ñ MAIN MENU †]
8.BUZZER: OFF
2
Move the joystick to the left or right
to set the buzzer (Example: ON).
to set the buzzer (Example: ON).
[ó
ñ MAIN MENU í]
8.BUZZER: ON
Available settings: ON, OFF
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
return to the initial screen.
01GB_L8CSE_WA_VSP3000.indd 16
01GB_L8CSE_WA_VSP3000.indd 16
2008/02/29 13:17:03
2008/02/29 13:17:03