Sanyo VSP-3000 Manuel D’Utilisation
Preparations
17
7
Backlight setting
This sets the brightness of the system controller’s
menu display screen.
(Default setting: OFF)
menu display screen.
(Default setting: OFF)
1
Move the joystick up or down to
select “9. BACKLIGHT”.
select “9. BACKLIGHT”.
[ó
ñ MAIN MENU †]
9.BACKLIGHT:OFF
2
Move the joystick to the left or right
to set the backlight (Example: AUTO).
to set the backlight (Example: AUTO).
[ó
ñ MAIN MENU í]
9.BACKLIGHT:AUTO
Available settings:
OFF: Never illuminated
ON: Always illuminated
AUTO:
Illuminates only while the system
controller is being operated, and
switches off after approximately
30 seconds.
controller is being operated, and
switches off after approximately
30 seconds.
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
return to the initial screen.
8
Mouse setting
Use this setting when operating a DVR with a
mouse function. To use the mouse function,
change the setting to a setting other than “OFF”.
Refer to P12 for details on the connection method.
(Default setting: OFF)
mouse function. To use the mouse function,
change the setting to a setting other than “OFF”.
Refer to P12 for details on the connection method.
(Default setting: OFF)
1
Move the joystick up or down to
select “10. MOUSE SET”
select “10. MOUSE SET”
[ó
ñ MAIN MENU †]
10.MOUSE SET:OFF
2
Move the joystick to the left or right
to set the cursor movement speed
(Example: LOW).
to set the cursor movement speed
(Example: LOW).
[ó
ñ MAIN MENU †]
10.MOUSE SET:LOW
Available settings: OFF, LOW, MID, HIG
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
Refer to P29 for details on operating a DVR
with mouse function.
return to the initial screen.
Refer to P29 for details on operating a DVR
with mouse function.
Menu settings (continued)
01GB_L8CSE_WA_VSP3000.indd 17
01GB_L8CSE_WA_VSP3000.indd 17
2008/02/29 13:17:04
2008/02/29 13:17:04