Sanyo DVR-S120 Manuel D’Utilisation

Page de 40
23
DISC PLAYBACK
Basic Operations
1.  Turn the TV on and select input from the DVD recorder. (For details 
on operation methods, refer to your TV’s manual.)
2. Press 
o button. (It takes time to enter the condition the power 
supplied.)
3. Press 
rOPEN/CLOSE to open the disc tray.
4.  Place the disc with the label facing up on the disc tray.
5. Press 
rOPEN/CLOSE or w.
 
The disc tray closes. The disc is then read, and playback automatically 
starts.
•  While the disc is being read, “READING” is displayed on the front 
panel.
•  During playback, the elapsed time is displayed on the front 
panel.
When playback does not automatically start
Press w to start playback.
When the menu is displayed
Select the desired programme to play back by 4, 6, 8, 2, and press 
the k button.
Stopping playback
Press e to stop playback.
When you press w, the disc is played from the position when playback 
was stopped.
NOTE:
- When 
the 
e button is pressed and held down, “Progressive” as the 
TV screen setting will be changed to “Interlace” without System Menu 
operation. See “TV Screen Settings” on page 31.
Temporarily stopping playback (pause)
Press PAUSE s to pause playback.
To resume playback, press w.
Skipping chapters/returning to the start of chapters
With DVD titles, the content of a single title is divided into several blocks 
called “chapters.”
When you press NEXT f during playback or a pause, playback of the 
next chapter is started.
When you press PREV d during playback or a pause, the disc returns 
to the start of the present chapter, and playback is started.
Fast-forward/fast-reverse
When you press F.FWD v, the disc is fast-forwarded. Each press of 
F.FWD v changes the fast-forward speed.
When you press F.REV c, the disc is fast-reversed. Each press of F.REV 
c changes the fast-reverse speed.
To return to normal playback, press w.
Playing back in slow motion
When you press F.SLOW x, the disc is slow-forwarded. Each press of 
F.SLOW x changes the slow-forward speed.
When you press R.SLOW z, the disc is slow-reversed. Each press of 
R.SLOW z changes the slow-reverse speed.
To return to normal playback, press w.
Viewing from a desired camera angle
Some DVD-Video discs may contain scenes which have been shot 
simultaneously from a number of different camera angles.
The jacket or case of discs that are recorded with angles will be 
marked.
Example: 
In the case of discs that allow the camera angle to be selected, the angle 
selection menu will be displayed for several seconds at the beginning. 
The camera angle can be changed by pressing 8 or 2 while this menu 
is displayed.
1/3
Angle
After this menu disappears, if you want to change the camera angle again, 
see “Various Playback Operations Using T/C Tools” on page 24.
Repeat Playback
Each press of the PLAY MODE button during playback displays the playback 
modes. Press the k button to select the desired playback mode.
Playback Mode
Explanation
Repeat Chapter
Repeats the chapter currently being played.
Repeat Title
Repeats all chapters.
Repeat A-B
Repeats only a specifi ed section.
To select a specifi ed section, press the k button 
at the repeat start point (A). The display changes 
to Repeat B. Press the k button again at the 
repeat end point (B).
(None)
Select this to cancel the PLAY MODE setting. (The 
setting is cancelled even if you do not press the 
k button.)
Picture zoom
Press ZOOM during normal/slow playback or still picture. The central
part of the picture is magnifi ed, and “ZOOM X 1” appears on the TV 
screen. Each time you press ZOOM, the zoom mode will be changed 
as follows: 
ZOOM X 1 J ZOOM X 1.3 J ZOOM X 2 J ZOOM X 4 J ZOOM OFF 
Press 4, 6, 8 or 2 to change the zoom point.
To return to normal playback, repeatedly press ZOOM until the zoom ratio 
display at the bottom of the screen disappears.
NOTE:
Picture zoom may not work on some discs.
DVR_S120_INS_MANUAL.indd   23
DVR_S120_INS_MANUAL.indd   23
5/19/2005   11:54:24 AM
5/19/2005   11:54:24 AM